Power Line Transducers And Multifunction Meter
D5 MFT1
D5MFT1 is a Multifunction Power Line Transducer for simultaneous measurement of various electrical parameters of 3 Phase 3 Wire or 4 Wire electric power system. The information is available through 4 Nos. of galvanically isolated Analog Outputs and RS 485, Half Duplex Serial Communication Port over MODBUS RTU Protocol. Use of latest circuit techniques and quality components ensures reliable operation over long periods. The Transducer are widely used in application areas where accurate and reliable monitoring of power line parameters is essential.
This is a modified version of earlier Microwarn 9600 model which has been discontinued.
Microwarn O600 is now more compact than before with reduced depth. Also it can have 3 output relay for extra function. Microwarn 0600 consists of 3 basic sections:
- The Power Pack
- The CPU
- The Facia
Notes
- COVER MOUNTING SCREWS
- TERMINAL STRIP FAULT INPUT
- LED BOARD
- POWER SUPPLY CONNECTOR
- SLOT FOR MOUNTING CLAMP
- TERMINAL FOR EXTERNAL PUSH BUTTON
- FACIA
- C COVER
- DIP SWITCHES
- FUSE
- RELAY OUTPUT
- SMPS + CPU CARD
Functional Block Diagram- The Microwarn 0600 is powered by a highly reliable and noise free, specially designed power supply. It converts the available power source (AC/DC voltage supply) into a regulated and filtered DC output, which is fed to the annunciator unit
The Power Pack
- This is the Central Processing Unit of Microwarn 0600 which scans and processes the incoming fault signals from the various potential free field contacts and drives the corresponding LED windows and the audible devices in order to announce the fault, according to the operating sequence selected
The CPU
- This section consists of facia windows illuminated by “Super Bright LEDs” on occurrence of any fault. The Super Bright LEDs ensure a long and absolutely maintenance free window life along with a good visibility, and have very low power consumption
The Facia
NO/NC T/NT or sequence selection DIP switches are located outside, hence programming is now possible without opening the unit
Models of 12, 8, 6 windows are available. 8 and 6 window models are with built-in push buttons.
- 3rd Supervisory Relay
Optional Features
- The Microwarn 0600 is powered by a highly reliable and noise free, specially designed power supply. It converts the available power source (AC/DC voltage supply) into a regulated and filtered DC output, which is fed to the annunciator unit
The Power Pack
- This is the Central Processing Unit of Microwarn 0600 which scans and processes the incoming fault signals from the various potential free field contacts and drives the corresponding LED windows and the audible devices in order to announce the fault, according to the operating sequence selected
The CPU
- This section consists of facia windows illuminated by “Super Bright LEDs” on occurrence of any fault. The Super Bright LEDs ensure a long and absolutely maintenance free window life along with a good visibility, and have very low power consumption
The Facia
NO/NC T/NT or sequence selection DIP switches are located outside, hence programming is now possible without opening the unit
Models of 12, 8, 6 windows are available. 8 and 6 window models are with built-in push buttons.
- 3rd Supervisory Relay
Optional Features
- Supply Voltage 18-60 V DC, 80-300 V AC/DC, 50Hz
Supply Voltage
- Power ConsumptionsLess than 6 VA
Power Consumption
- SenssorNA
Senssor
- DC Output (Single / Dual)4 Nos. of Galvanically Isolated 4-20 mA DC, 500 or 700 0hm
DC Output (Single / Dual)
- No of Signal Output NA
No of Signal Output
- Response Time Less than 500 mSec.
Response Time
- Input / Output isolation 2 KV AC, 50 Hz for 1 min.
Input / Output isolation
- Temperature 0 - 55 Deg. C.
Temperature
- Humidity95% RH Non - Condensing
Humidity
- Accuracy±0.5% of span
Accuracy
- EnclosureABS Plastic Enclosure, Ingress Protection IP40
Enclosure
- Dimensions (L X W X D) (mm)150 X 70 X 114
Dimensions (L X W X D) (mm)
- Weight750 gms.
Weight
Suitable for Panels in Following Applications:
- Suitable for Panels in Process Plants, Diesel Generator sets, Central Control Rooms etc.
- C & R Panel
- Material handling Systems
