Potential Free Inputs
Potential Inputs
Alarm Annunciator
Power Line Transducers And Multifunction Meter
D1 PTC3 / D1 PTV3
- 2 Wire Current transducer
- Input AC Current
- Output (DC) single
- Accuracy 0.5%
D1 PTC3
- 2 Wire Voltage transducer
- Input AC Voltage
- Output (DC) single
- Accuracy 0.5%
D1 PTV3
Operations
The Transducer converts the A.C. Input current or Voltage signal to a 4-20mA D.C. Output. The output is directly proportional to the input signal. 2 Wire Transducer obtain the power to operate from the 4-20mA output circuit to which they are connected, and therefore require no separate auxiliary supply. It is average sensing RMS calibrated current Transducer. 2 Wire Transducers have an advantage over conventional auxiliary powered transducer, because no separate auxiliary is required, savings in the cost of providing a separate auxiliary supply and wiring are made. The above Transducer can be used to measure current or voltage in energy management systems, switchboards, generator and telemetry controls. Isolation of 2 KV is provided between the input and output signal, allowing the output to be fed to conventional analogue meters, digital meters, PLC, and computer systems.- Auxiliary Supply 7.5 - 36 V DC, 2 Wire Type (Mostly 24 V DC)
Supply Voltage
- Power ConsumptionLess than 1 VA
- SensorN.A.
- I in0 – 1 A / 0 – 5 A AC for D1 PTC3
- V in0 – 150 V, 0 – 300 V, 0 – 500 V AC or any user range for D1 PTV3
Input Value
- Resistance Type N.A.
- DC Output (Single / Dual) 4 - 20 mA DC
- No of Signal Output Single
- Response Time Less than 500 mSec.
- Input / Output Isolation 2 KV 50 Hz for 1 min.
- Temperature 0 – 55°C.
- Humidity 95% RH Non-condensing
- Accuracy (+/-)0.5% of Span
- Enclosure D1
- Dimensions (L x W x D) (mm) 30 X 80 X 120
- Weight 100 gms.
- MCC Panel
- Metering Panel
