D3 MFT1

D5MFT1 is a Multifunction Power Line Transducer for simultaneous measurement of various electrical parameters of 3 Phase 3 Wire or 4 Wire electric power system. The information is available through 4 Nos. of galvanically isolated Analog Outputs and RS 485, Half Duplex Serial Communication Port over MODBUS RTU Protocol. Use of latest circuit techniques and quality components ensures reliable operation over long periods. The Transducer are widely used in application areas where accurate and reliable monitoring of power line parameters is essential.

Features:

• Monitoring of various electrical parameters from a Single Transducer Replaces Multiple Analog Transducers.
• Programmable CT and PT Ratio.
• Modbus RTU Communication Protocol.
• Complete galvanic isolation between Input, Output, Auxiliary Supply.
• High long term stability.
• DIN Rail, Panel Wall Mounting.

Supply Voltage

• Auxillary 18-60 V DC, 80 - 300 V AC/DC, 50Hz

Power Consumption

• Power Consumption Less than 6 VA

Sensor

• Sensor N. A.

Input Value

• I in 1A, 5A (User Selectable)
• V in 110 V, 415 V (User Selectable)

Resistance Type

• Resistance Type N. A.

DC Output(Single/ Double)

• DC Output(Single/ Double) 4 Nos. of Galvanically Isolated 4-20 mA DC, 500 or 750 Ohm

NO. of Signal Output

• NO. of Signal Output N. A.

Response Time

• Response Time Less than 500 mSec.

Input Output Isolation

• Input Output Isolation 2 KV AC, 50 Hz for 1 min.

Temperature

• Temperature 0 – 55 Deg C.

Humidity

• Humidity 95% RH Non – Condensing

Accuracy

• Accuracy ±0.5% of Span

Enclouser

• Enclouser ABS Plastic Enclosure, Ingress Protection IP40

Dimensions (mm)

• Overall (L x W x D) 150 x 70 x 114

Approx Weight

• Approx Weight 750 gms