Power Line Transducers And Multifunction Meter
D5 PAT1
Precision grade transducer used for measurement of Phase Angle between Voltage and Current Waveforms of a 3 Phase 3 Wire or 3 Phase 4 Wire Electrical Network System.
Technical Data
- Auxiliary Supply 110/240 V AC ± 15%, 24/48/110/220 VDC ± 10%, 18-60 V DC, 80-300 VAC/DC, 50Hz Self Powered
Supply Voltage
- Power ConsumptionLess Than 4 VA - DC
- Input Value
- I in1 or 5 A AC
- V in110 V AC (HT Supply), 415 VAC (LT Supply)
- Resistance Type3 Wire, 4 Wire
- DC Output (Single / Dual)4-20 mA DC,0-1,0-5,0-10,0-20 mA DC, 0-(+)5 0-(+)10,0-(+)20 mA DC, 0-5,0-10 VDC
- No of Signal Output Single (Optional Dual Output)
- Response Time Less than 500 milliseconds
- Input / Output Isolation 2 KV 50 Hz for 1 min
- Temperature0°C to + 55°C
- HumidityUp to 95% Rh non condensing
- Dimensions (L x W x D) (mm)150 X 70 X 114
- Weight1200 gms.
Common Specifications
- Output Load Resistance (Rout)
- For Current OutputMax. 10V/I out (Optional Max. 15V/Iout)
- For Voltage Output10 Kohm (min.)
- Output RippleLess than 0.5% of span (peak to peak)
- Auxiliary Supply BurdenLess than 4 VA
- Insulation ResistanceMore than 100 Mohms at 500 V DC
- Zero Span AdjustmentOptionally provided
- TerminalsSuitable for 2.5 sq.mm wires
- Enclosure TypeABS Plastic, Ingress Protection IP40
