Home  |  Contact Us

banner_phase_failure_relays


 
Products I Motor / Pump Protection Relays I S2 CTS1



S2 CTS1
Current sensor suitable for full load motor current of 5A. 10A. 20A. 40A. and 80A.to be used with Minilec relays only.
Supply Voltage
System : N.A.
Auxillary : N.A.

Output Relay Contact : 3-wire Output

Input : -

Trip Setting
Phase to phase unbalance : N.A.
Under current (Dry running) : N.A.
Overload : N.A.
UV/OV : N.A.

Trip Time Delay
On phase failure : N.A.
For overloading : N.A.
UV/OV RP : N.A.

Resetting : -

Approx Weight : 140 gms

Dimensions (mm)
Overall (L x W x D) : 90 x 35 x 60
Mounting (L x W) : 35 mm Rail Mounting

Note:
Wherever not specified Contact Rating : 5A @ 230 V AC (resistive)

Times full Load Current
S2 CTS1

Relay contact position shown in 'Power off' condition
 
 
 



MODELS

Motor / Pump Protection Relays

Microprocessor Based Pump Automation System

Winding Over - Temperature Protection Relays