Home  |  Contact Us
banner_phase_failure_relays

 
Products I Alarm Annunciators I MBAS 0600
MBAS 0600
MBAS 0600
MBAS 0600 is a improved version of earlier MBAS 9400, and is available for 4 to 32 windows
The Functional Features
Fixed Sequence ( S1/S2/S3/S4)
Potential free dry contact inputs
NO/NC inputs selectable configuration
Relay output for external Audible Hooter 3rd Relay optional for either of below mentioned features
a) Ring back hooter
b) Supervisory control
Minilec Standard Communication Protocol
The Design Features
Single chip microcontroller logic
Opto isolated inputs and outputs
Super Bright LED window illumination
High Noise immunity / isolation
Switch mode power supply
Self surveillance watchdog LED
The Constructional Flexibility
Conforming to DIN panel cutouts
Replaceable snap-on window capsules
Two different window size
Molded enclosures
Optional Features
Any custom built operating sequences
Manned / Unmanned function
MODBUS RTU/ASCII Protocol
Fault Follower contact output per fault Input (NO or NC)
Supply fail indication / annunciation Built in
Built-in control push buttons

System Enclosures
Back view showing Terminal details PC Side software
MBAS 0600 MBAS 0600 MBAS 0600
The MBAS 0600 annunciation systems is configured in multiples of four basic ABS moulded enclosures    
Supply Voltage : 24 / 30 / 48 / V DC, 20-60 V AC/DC, 90-270 V AC / DC

Windows : 4 / 6 / 8 / 12 / 16 / 18 / 22 / 24 / 32

Window Sizes :
30 x 30mm / 30 x 65 mm

Display Device : Super bright high efficiency low power consuming LED's

Facia Type : Individual windows Front Replaceable

Window/LED Colours : RED, Yellow, Green, White & Blue

Flash Rate : Fast - 60 flashes/min. Slow - 30 flashes/min.

Response Time : 40 msec.

Input Signal : Potential free contacts (NO or NC site selectable)

Grouping : Trip / Non Trip site selectable

Interrogation Voltage : + 12 V DC

Output Contacts : 1 NO + 1 NO + 1 NO (optional)

Architecture : Integrated

Operational Sequences
(site selectable)
: Auto/Manual/First-up/Ringback (optional)
OR any other sequence on request

Operational Temp. : 0-60 degrees C

Power Consumption : 1.5 Watts per Window (Max)

Optional : AC-DC fail Annunciation or Indication / Repeat Relays / RS232 - 485 Port

Dimensions (mm)
Panel Cutout (L x W)
Overall (L x W x D)
:
:
:
1D 2D 3D 4D
138 x 68 138 x 138 138 x 210 138 x 282
144 x 72 x 215 144 x 144 x 215 144 x 216 x 215 144 x 288 x 215
Wherever not specified Contact Rating : 5A @ 230 V AC (resistive) * CE marked products available on request.

Note
In Case of Normal Supply Failure, RLY-3 is for Stand by Hooter (at AC/DC fail feature)
For supply fail Annunciators/Indication, Window no. 01 is dedicated.
External SMPS is provided for different supply voltages.
 
Part names & locations Dimnesional & Panel Cutout Details
MBAS 0600 MBAS 0600
 
Functional Block Diagram Connection Diagram (FOR MAX. 32 POINT MBAS 0600.)
MBAS 0600 MBAS 0600

Note
In Case of Normal Supply Failure, RLY-3 is for Stand by Hooter (at AC/DC fail feature)
For supply fail Annunciators/Indication, Window no. 01 is dedicated.
External SMPS is provided for different supply voltages.
 
   
   
Suitable for Panels in Following Apllications:
Suitable for Process Plant,
Plants, Diesel Generators,
Control Rooms,
C & R Panel
Material handling Systems
Instrumentation Panel
Battery Charger panel
Compressor control panel
 
 
 
 



All Minilec Alarm Annuciators carry a 5 year's warranty

warranty

Alarm Annunciators