Home  |  Contact Us

banner_phase_failure_relays


 
Products I Power Line Transducers I D3 TET1



D3 TET1
Temperature transducer
Input PT 100
Output (DC) single or dual
Accuracy 0.5%

Operations

It is a precision grade transducer is used for galvanically isolated measurement of Temperature using external PT100 (RTD) Sensor 3 Wire Type. It measures temperature by measuring resistance of the PT100 Sensor. The input is in the form of Resistance and provides a Stable, Ripple-Free and Optically Isolated DC load independent output in the form of current or voltage. The transducer is fully solid state. Use of latest circuit techniques and quality components ensure reliable operation over long period.
Auxiliary Supply : 110/240 V AC (+/-)20%, 50 Hz / 60Hz
24/48/110/220 V DC (+/-)20%
60 – 300 V AC / DC

Power Consumption : Less than 4 VA

Sensor : P T– 100, 3 Wire Connection

Input Value
I in
V in
:
:
N.A.
N.A.

Resistance Type : N.A.

DC Output (Single / Dual) :
0 – 1 mA DC,0 – 5 mA DC,0 – 10 mA DC,0 – 20 mA DC,4 – 20 mA DC,(-)20 – 0 - (+)20 mA DC,4 – 20 mA DC, 500 Ohm (max),0 – 5 V DC, 0 - (+)10 V DC,(-)10 – 0 - (+)10 V DC

No of Signal Output : One No., Two Nos.

Response Time : Less than 500 mSec.

Input / Output isolation : 2 KV 50 Hz for 1 min

Temperature : 0 – 55°C.

Humidity : 95% RH Non-condensing

Accuracy : (+/-)0.5% of Span

Enclosure : D3

Dimensions (L x W x D) (mm) : 85 X 80 X 120

Weight : 350 gms.
Electrical Connection Diagram
D3 TET1
Suitable for Panels in Following Apllications:
Metering Panel.
Automation Panel.
SPM Panels.
Industrial Control Room Panels.
 
 
 
 



Voltage, Current, Frequency Transducers

Power Transducers

Isolation Transducers

Transducers Models